By Aamir Siddiqui · Originally published on Medium.
Last week, I was in Saudi Arabia, and as I travelled through the Kingdom, I kept looking at the mountains and thinking about the minerals they hold. There is so much land, sand appears almost everywhere, and energy is abundant. The roads, airports and logistics infrastructure also stood out to me. Looking at all of this together, I started wondering what it would take to bring AI-chip manufacturing to the Kingdom.
Could Saudi Arabia become the next great AI-chip manufacturing hub? I felt there was enough behind that question to look into it further. The resources are one part of it, but so is the country’s ability to build large industrial facilities and connect them with the infrastructure needed to operate.
I look at this through nearly two decades of experience across enterprise technology, energy and artificial intelligence, including technical and leadership roles at Halliburton, ExxonMobil and Chevron. While at Chevron, I presented work on AI and machine-learning predictive analytics for multiphase flow and oil-and-gas production forecasting at Ai4 2020.
Most recently, our company was selected as one of the first 50 OpenAI SMB partners. Our work focuses on solving the last mile of AI implementation, helping businesses move from experimenting with AI to using it in their operations. That work keeps bringing me back to the same practical questions: what is needed to make the technology work, who will operate it, and how will the business measure the result?
I think Saudi Arabia’s chip opportunity needs to be considered in much the same way. The Kingdom has resources, capital and infrastructure to build on. The work ahead is to identify which parts of chip manufacturing it can develop, bring in the right partners and make those operations commercially viable.
What Can the Raw Materials Actually Contribute?
It is easy to look at the amount of sand in Saudi Arabia and connect it with silicon chips. But there is a considerable amount of work between the two. Semiconductor manufacturing starts with highly purified materials and involves specialized chemicals, gases and equipment, with very tight control over the production process. ASML’s description of how microchips are made shows why precision and contamination control are central to the work.
Saudi officials estimate the Kingdom’s mineral resources at approximately $2.5 trillion across a range of commodities. That figure gives an indication of the broader mining opportunity; it does not tell us which materials are ready for use in semiconductor production. Reuters on Saudi mineral resources.
This is where I would connect the mineral discussion with Saudi Arabia’s existing mining, metals, petrochemical and industrial-gas businesses. Which of those businesses could develop products that chip manufacturers need? Could they refine selected materials, produce semiconductor-grade chemicals or supply gases at the required purity? Those questions lead to specific products, processing requirements and potential customers.
For example, producing a chemical in large quantities is one capability. Producing it consistently at a quality that a semiconductor manufacturer will accept requires additional work. The opportunity would be to invest in that processing and qualification, so Saudi businesses can sell more valuable products from the industrial base they already have.
Some inputs would still need to be imported. A Saudi manufacturing operation can use imported materials and still create local value through processing, packaging or fabrication. What matters to the customer is whether the product meets its requirements and can be delivered reliably.
Energy, Land and Logistics Have to Work Together
The availability of energy and land becomes useful when a manufacturer can turn them into a working facility. That means reliable electricity, water treatment, waste handling and access to people who can maintain the equipment. The cost of the land is only one part of what the business will spend to keep production running.
This is an opportunity for Saudi Arabia to plan industrial locations around the needs of manufacturers and their suppliers. A site could include space for materials businesses, equipment support and future expansion, with utilities planned for the whole operation. The roads, airports and logistics infrastructure I saw give the Kingdom something to build on, although each location would still need to meet the handling and delivery requirements of the industry.
From an operating perspective, I would look at the total cost of producing a chip that meets the customer’s specification. Lower electricity costs can help, but the facility also needs to limit production interruptions and defective output. Saudi Arabia’s advantage will depend on how well it brings these requirements together.
There Are Already Initiatives to Build On
The National Semiconductor Hub is a useful starting point because its objectives include attracting chip-design companies, developing engineering talent and connecting businesses with universities, research institutions and investors. At its 2024 launch, the initiative was reported to target at least 50 semiconductor-design companies and the training of 5,000 design engineers by 2030, with support from a $266 million deep-tech venture fund. LEAP Forward’s launch coverage.
Alat brings another part of the picture through its published $100 billion investment plan by 2030, covering its broader manufacturing ambitions. Taken together, these initiatives give Saudi Arabia ways to develop design expertise, attract industrial partners and support new businesses. Their contribution to chip manufacturing will depend on which projects move into production and how the companies involved work with one another.
For me, the practical connection is between the engineer designing a product, the company manufacturing it and the customer willing to buy it. Training programs and investment can support that connection, but there has to be a route for the resulting products to reach the market.
How AI Demand Could Help Build Manufacturing
HUMAIN adds a potential source of demand. In its May 2025 announcement, NVIDIA described plans with HUMAIN for Saudi AI infrastructure with projected capacity of up to 500 megawatts over five years, starting with a planned deployment of 18,000 GB300 Grace Blackwell GPUs. These are plans for computing facilities that use AI chips, rather than facilities that manufacture them.
The question I would ask is how Saudi businesses could participate in the hardware and services needed around that investment. There may be opportunities in components, testing, power systems and engineering support. Saudi industries such as energy and mining could also provide customers for locally designed chips addressing specific operating requirements.
That demand would need to be connected to manufacturing through agreements with technology partners and customers. Purchasing finished processors does not automatically bring the rights or expertise to manufacture them locally. The opportunity is to use those commercial relationships to identify what can be produced in Saudi Arabia and what would make it worthwhile for the companies involved.
I would begin by examining chip design, packaging and testing alongside selected materials businesses. Packaging is itself technically demanding, so it would require experienced partners, specialized equipment and customer qualification. Saudi Arabia could then consider fabrication where there is a credible combination of technology access, engineering capability and committed customers.
Water supply, reliable power and the availability of skilled people would need to be included from the start. The same applies to equipment access, intellectual-property rights and any necessary export permissions. These are part of deciding whether a particular manufacturing project can work, and they should be resolved before committing to its scale.
Why I Am Betting on the Arabian Stallion
What stayed with me after the visit was the possibility of connecting what I saw with an industry the Kingdom could build. The mountains prompted the thought, but looking into the question brought me to the businesses, engineers and customers that would have to make it happen.
I believe Saudi Arabia has enough of the starting conditions to pursue this seriously. It will need to choose where to begin, work with companies that already have manufacturing experience and develop local teams capable of running and improving production. Progress should be visible in products reaching customers and those customers coming back with more orders.
In our own work, the last mile of AI implementation is where we find out whether the technology can deliver value in everyday operations. For Saudi Arabia, the challenge is to turn its resources and industrial investments into manufacturing businesses that can compete. That is the opportunity I see in front of the Kingdom.
Saudi Arabia has not yet won the semiconductor race. But if I had to bet on the next great AI-chip manufacturing hub, I would bet on the Arabian stallion.